What Do You Know About Ford Tier 4 Test Drivers?

By: Dave Davis
Estimated Completion Time
4 min
What Do You Know About Ford Tier 4 Test Drivers?
Image: Motor.TV via YouTube

About This Quiz

They're the "Top Guns" of driving. They're the best of the best. They are, literally, the top .18% of some of the world's best drivers. They are the Ford Tier 4 test drivers, and their job is to make sure that the Ford vehicles that show up on the dealership floor and put into the hands of customers are the safest cars the company can make. To car enthusiasts in general — and Ford fanatics in particular — they have the coolest job in the world, but how much do you know about these elite drivers?

Ford put its "tier" system into place in 2001 as a way of ensuring that drivers are trained and prepared to test vehicles in different situations, with each advancing tier able to handle more difficult tasks. Tier 4 is the last tier, and its drivers show what a vehicle can truly do.

The main goal of these drivers is to give their feedback to the engineers responsible for designing the vehicles. Simulations can only go so far. To get real-world information about a car, you have to have someone drive it, and there's no one better for the job than a Tier 4 driver.

It's a rigorous training program, with very few reaching Tier 3 and even fewer awarded with the elite Tier 4 rating. So, how much do you know about the program and what it takes to make the grade? This quiz will shed some light on these heroes of the test track. Are you ready to push your knowledge to the limit on the track? Let's go!




2 - car drift
Ford Performance via YouTube
When test drivers "drift" a car, what just happened?
They slowed the vehicle using just the transmission.
They put the car into a powered slide.
They tested it on icy roads.
They released the steering wheel to test tire alignment.
Correct Answer
Wrong Answer

A "drift" happens when the driver deliberately oversteers the vehicle, losing traction in the rear wheels going through a corner but is still being in control. It's a tricky maneuver but can tell the driver — who can tell the engineer — more about how the vehicle handles.

Advertisement

10 - roll cage
Monty Rakusen/Cultura/Getty Images
When it comes to professional driving, what is the function of a roll cage?
To keep the vehicle upright
To maintain radio communications
To set the boundaries of the course
To protect the driver in the event of a rollover
Correct Answer
Wrong Answer

A roll cage is a frame built within a car's frame that is designed to protect the driver and passenger in the event of a rollover or other accident. The vehicles Tier 4 candidates train in roll cages — in the case of the training truck, the cage is outside of the frame, which is known as an "exo cage."

Advertisement

16 - surfaces
Ford Motor Company
Which of these tests are conducted by Tier 4 drivers?
Trailer-towing limit testing
High center-of-gravity tests
Off-road tests
All the above
Correct Answer
Wrong Answer

To test a vehicle and stress it to its limits, the driver has to know their car and their own abilities to get useful, actionable data and information. The vast majority of ordinary drivers will never put their vehicles into the situations that Tier 4 drivers do, but this type of testing ensures that the car will meet the "everyday" needs of customers.

Advertisement

6 - talking to engineer
Monty Rakusen/Cultura/Getty Images
Other than stressing vehicles to their limits, what is another task assigned to Tier 4 drivers?
Press interviews
Providing feedback to engineers
Car show appearances
Racing pit crew training
Correct Answer
Wrong Answer

The drivers' main goal is to gather information about their experience with the vehicle and then give feedback to the engineers responsible for its design. By offering "real-world" information, rather than data collected in simulations, the drivers provide designers with crucial information to improve the vehicle.

Advertisement

4 - sunglasses
Fuse/Corbis/Getty Images
Which of these are NOT necessary to wear when testing a car at the Tier 4 level?
Helmet
Sunglasses
Gloves
Firesuit
Correct Answer
Wrong Answer

No matter how trained and prepared a driver may be, when testing vehicles at this level, it's wise to be prepared for anything. Test drivers wear helmets and fire-resistant clothing just in case something goes disastrously wrong so they can do it all again the next day.

Advertisement

20 - training car to limits
Motor.TV via YouTube
In Tier 4 testing, what is the reasoning behind making drivers push the training car to its limits again and again?
To be able to make "stunt" commercials
To show off what the car is capable of doing
To make them "forget" they are driving
To find the best of the best
Correct Answer
Wrong Answer

The goal of making drivers training for Tier 4 certification to push the Mustang PF350S to its limit is to train them to know — automatically — what to do in any situation so they can pay attention to how the vehicle they are testing is performing, rather than worrying about their own reactions. By "forgetting" about their own driving, they can provide better feedback about the automobiles they test.

Advertisement

24 - slalom
MARZIL's GARAGE - via YouTube
What does it mean to "slalom" a vehicle in a test drive?
To steer from side to side
To test the vehicle's braking distance
To oversteer intentionally
To perform a tire "burnout"
Correct Answer
Wrong Answer

Driving a vehicle from side to side, often to avoid hitting cones put out for the exercise, is a great way to test a vehicle's stability when it comes to tight maneuvers. The truck used to test Tier 4 candidates is equipped with outriggers to avoid overturning the vehicle.

Advertisement

13 - surfaces
nycshooter/E+/Getty Images
At the Ford proving grounds, Tier 4 drivers test their vehicles on which type of surface?
Smooth, flat asphalt
"Wet pad" roads
High-banked curves
All the above
Correct Answer
Wrong Answer

The Dearborn Development Center offers drivers and engineers the opportunity to test their vehicles on roads and in conditions that consumers may find themselves driving (and some, like high-banked curves, that they may not). Real-world situations give designers information that flat, perfectly smooth roads alone will not.

Advertisement

15 - 150 mph
Kiyoshi Hijiki/Moment/Getty Images
What is the top speed for drivers who are Tier 3 certified to reach during testing?
150 mph
75 mph
200 mph
100 mph
Correct Answer
Wrong Answer

Tier 3 certified drivers have undergone extra training and are cleared to conduct stability control and braking tests, along with other maneuvers. While they are limited to a top speed of 150 mpg, they are professionals who know how to handle the vehicle in a number of situations safely.

Advertisement

17 - Ford Explorer Sport Trac
Wiki Commons by IFCAR
One of the vehicles in Tier 4 training is nicknamed the "Buggy O' Fun." What type of vehicle is it?
Ford F-250 Super Duty
Ford Econoline van
Ford Transit Connect
Ford Explorer Sport Trac
Correct Answer
Wrong Answer

The "Buggy O' Fun" is a specially modified Explorer Sport Trac that has had a system of adjustable weights, outriggers and a roll cage added to test drivers on their ability to put a top-heavy vehicle on two wheels and get it back under control safely. It was developed to address rollover concerns in SUVs in the late 1990s.

Advertisement

8 - Mustang FP350S
Motorward via YouTube
Which of these is one of the vehicles used for Tier 4 certification training and tests?
Chevy Camaro
Ford F-150
Mustang FP350S
Ford Focus RS
Correct Answer
Wrong Answer

The "performance" vehicle used in Tier 4 testing and certification is a Mustang FP350S, a special racing variant of the Shelby GT350R. It was made in 2017, and only 50 units of this model were ever offered for sale. The Mustang used for testing has been further modified.

Advertisement

29 - manuevers
EverydayDriver via YouTube
Which of these is a maneuver a Tier 4 driver needs to be an expert at accomplishing?
Drifting
Figure-8 drifting
Initiating near rollovers
All the above
Correct Answer
Wrong Answer

Test driving at this level isn't for the faint of heart, and Tier 4 drivers must be comfortable maneuvering a vehicle in ways that test its design and control features. These skills and more are necessary to give engineers feedback on improving designs.

Advertisement

9 - tier 2
Ford Motor Company
What does a Tier 2 certification allow you to do on the proving grounds?
Drive up to 200 mph
Perform spin maneuvers
Conduct "every day" road tests
Perform the "Bootlegger 180" challenge
Correct Answer
Wrong Answer

To reach Tier 2, a Tier 1 certified driver undergoes training and testing to ensure they can safely handle the vehicle in situations the average driver could reasonably find themselves in and then provide feedback about their experiences. Ford estimates that about 95% of the consumer's expected experiences with the vehicles fall within Tier 2 testing.

Advertisement

22 - qualities driver
Francesco Carta fotografo/Moment/Getty Images
Which of these qualities is more important for a Tier 4 driver to have?
Daring
A love for speed
Consistency
Eagle-like eyesight
Correct Answer
Wrong Answer

One of the main qualities a test driver must have is the ability not only to perform a maneuver but also to be able to deliver that maneuver again and again with a high level of consistency. This allows the engineers to look at a bigger set of useful data, rather than a "one-off" experience.

Advertisement

23 - lap time Tier 4
MotorTrend Channel via YouTube
Students must compete with their instructors' lap times to complete Tier 4 training. How close must they come to earn their certification?
They must beat their instructor's time.
Within 2.5%
Within 4.5%
Within 10%
Correct Answer
Wrong Answer

To pass and earn Tier 4 certification, a student must come within 2.5% of their instructor's lap time. To earn the Tier 3 certification, they must be within 4.5%. While it's not a competition, these times set the bar for what is expected from test drivers.

Advertisement

12 - journalist
smerindo_schultzpax/Moment/Getty Images
When breaking into professional test driving as a career, which of these careers/activities would be of the most benefit?
Advanced mathematics
BMX riding
Speaking a foreign language
Automotive writing/journalism
Correct Answer
Wrong Answer

The ability to communicate findings to designers is one of the top skills needed in test driving prototype vehicles — it's how the engineers know what is working and what needs more work. Being able to write and communicate clearly about an automobile goes a long way into becoming an effective partner for the designers.

Advertisement

33 - mechanical engineer
Monty Rakusen/Cultura/Getty Images
One of these degrees would be most valuable to a Tier 4 driver — can you name it?
Mechanical engineering
Statistical analysis
Aerospace engineering
Physics education
Correct Answer
Wrong Answer

While it's not a requirement to have a college degree to become a test driver, a solid understanding of mechanical engineering, and especially automotive engineering, goes a long way in effectively communicating findings and experiences to those professionals who are designing the automobile.

Advertisement

14 - 2001 Ford
Wiki Commons by Vauxford
When was the four-tier driving certification system put into place at Ford?
1957
2001
1987
2011
Correct Answer
Wrong Answer

To get the best data from its staff of test drivers, Ford put into place the four-tier system in 2001. This allowed the bulk of the data to come from those who were qualified but not trained to elite status while offering those with the talent and skills to push vehicles to their limit to give feedback only they could offer.

Advertisement

18 - waiting 5 years
LumiNola/E+/Getty Images
How long must a driver hold a Tier 3 certification before being considered for the next level?
Five years
One year
Six months
90 days
Correct Answer
Wrong Answer

Earning Tier 4 certification is the top honor in the Ford test-driving program and only open to those who have shown talent, determination and persistence. Also, before Tier 4 training begins, the student must be nominated by their manager.

Advertisement

3 - Ford proving grounds
SilverHorse Racing, LLC via YouTube
Where are the Ford proving grounds located?
Albany, New York
Detroit, Michigan
Los Santos, California
Dearborn, Michigan
Correct Answer
Wrong Answer

Ford Motor Company's proving grounds, where Tier 4 drivers are certified, are a part of the Dearborn Development Center, a 365-acre facility with 70 miles of test track made to be able to duplicate any road or weather conditions the company's vehicles might encounter.

Advertisement

30 - scope of projects
FangXiaNuo/E+/Getty Images
Besides the difficulty of moves Tier 4 drivers can perform, what's another significant difference between this level and duties of Tier 3 drivers?
Press appearances
Design consultations
The scope of the projects they are assigned
Training other drivers
Correct Answer
Wrong Answer

Tier 4 drivers are usually tapped to test vehicles from multiple programs, while Tier 3 drivers are often assigned to particular projects and stay with those vehicles during development and testing.

Advertisement

27 - how many drivers
Fuse/Corbis/Getty Images
Approximately how many drivers does Ford have in its test driving program?
1,000
5,000
11,000
20,000
Correct Answer
Wrong Answer

Ford produces a lot of vehicles on the global stage, and each of them has to be tested on several different levels, from "everyday" usage to stressed operations to ensure that the vehicle is more-than-reasonably safe for consumers. Ford has 11,000 drivers around the world who are key components to achieving this goal.

Advertisement

25 - HS degree
Sam Edwards/OJO Images/Getty Images
What type of degree does a candidate for Tier 4 certification need to hold?
Master's degree
Bachelor's degree
Post-graduate degree
High school degree
Correct Answer
Wrong Answer

Becoming a test driver doesn't require a college degree. To be successful, a candidate must be able to communicate clearly above all — their main job is to provide feedback to designers about how the vehicle handles and what their experience was like. An understanding of the mechanics of the machines involved is also fundamental.

Advertisement

32 - car engineer tier 2
skynesher/E+/Getty Images
Ford engineers are most likely to hold which certification in the company's test-driving system?
Tier 1
Tier 3
Tier 2
Tier 4
Correct Answer
Wrong Answer

Engineers don't have to have elite training to test out the vehicles they are designing, but they do require some practice to test out their ideas in the real world safely. Those who hold Tier 2 certification can put their projects to the test — up to a degree — and get first-hand knowledge and information about their vehicles.

Advertisement

35 - car engineer moving
Monty Rakusen/Cultura/Getty Images
True or false: Ford prevents engineers from moving between performance and consumer product lines.
True — the staff are always kept separate.
Mostly true — there are only a few who travel between.
False — the company doesn't actually have separate lines.
False
Correct Answer
Wrong Answer

Ford engineers often work on more than one product line, and that includes "performance" machines. This crossover helps move technology that was once considered "racing" tech into the consumer market. Test drivers are key in providing feedback that helps this transition between product lines, as well.

Advertisement

28 - instructor directs
EverydayDriver via YouTube
True or false: The instructor directs the test driver from a control booth.
True
False
It depends on the type of test being administered.
The instructors can decide where they'd rather be during the test.
Correct Answer
Wrong Answer

The vehicles used in the testing and training of test drivers are equipped with two seats, with the instructor being able to observe the candidate's performance first hand.

Advertisement

34 - 500 HP
Motor.TV via YouTube
Which of the following is true about the car used to train Ford test drivers at the Tier 4 level?
It can generate more than 500 horsepower.
It's an unmodified 2017 Mustang.
It's got two steering wheels (driver/trainer).
All the above
Correct Answer
Wrong Answer

The Ford Performance Shelby FP350S is a monster of a vehicle, with a 5.2-liter V8 that can generate more than 500 horsepower. This specially designed version of the Shelby GT350R also has modified suspensions and a six-point roll cage. It takes a special kind of driver to tame this beast.

Advertisement

21 - wash out rate
Sidekick/E+/Getty Images
What is the "wash out" rate for drivers going for Tier 3 status?
About 35%
About 60%
About 10%
About 90%
Correct Answer
Wrong Answer

Before they can even consider Tier 4 training, drivers must achieve Tier 3 status, which isn't an easy level to attain — about 35% of those taking the tests fail the test. Ford wants to make sure only qualified drivers are put behind the wheel when it comes time to stress a vehicle on the track.

Advertisement

26 - test factors
EverydayDriver via YouTube
How many factors are being tested during a Tier 4 driving test?
Up to 50
Up to 100
Up to 25
Up to 75
Correct Answer
Wrong Answer

The vehicle used in training and testing Tier 4 candidates is equipped with a data acquisition system that measures up to 50 different elements during the ride, including information about the student's braking, steering and other handling metrics.

Advertisement

31 - Electronic Driver Certification Tracking System
RonBailey/E+/Getty Images
The name of Ford's driver certification program is ... ?
Ford Future Driver Program
Driver Certification and Training System
Vehicle Skills and Handling Training Internship
Electronic Driver Certification Tracking System
Correct Answer
Wrong Answer

The Electronic Driver Certification Tracking System (EDCERTS) is the training and testing system set up by Ford that awards Tier 1 through Tier 4 status to its drivers.

Advertisement

5 - drive on the proving grounds
The Wheel Network via YouTube
In Ford's Tier system, what does Tier 1 certification allow drivers to do?
Attempt roll-over correction
Driver faster than 100 mph
Drive a vehicle on the proving grounds
Give feedback to engineers
Correct Answer
Wrong Answer

You've got to start somewhere, and anyone who wants to be a Ford test driver starts at Tier 1. The main qualification for this level is a valid driver's license. This is your ticket to the track — where you go from here is up to your determination, skills and willingness to learn.

Advertisement

1 - Ford's test driving program
Motor.TV via YouTube
About how many in Ford's test-driving program qualify for Tier 4 status?
10
20
50
500
Correct Answer
Wrong Answer

Tier 4 status is the elite level of Ford's test-driving program and is only open to the best of the best. These drivers put vehicles through maneuvers that ordinary drivers will never face to test the limits of the vehicle. Only .18% of drivers in the program reach this highest level.

Advertisement

7 - Tier 1 is not a test driver
Pexels by snoopy-alien.com
True or false: Tier 1 drivers are considered test drivers.
True
It depends on a number of factors.
They are classified as "testing drivers."
False
Correct Answer
Wrong Answer

To be considered a "test driver," you must achieve at least a Tier 2 level of certification. Those with only Tier 1 certification are not considered part of the group of 11,000 men and women in the Ford test-driving program.

Advertisement

11 - how many certified drivers
GoodLifeStudio/E+/Getty Images
How many Tier 3 certified drivers are in the Ford program?
47
315
512
2,518
Correct Answer
Wrong Answer

While it's a notch below the elite Tier 4, Tier 3 drivers are still some of the best in the world, with only 315 drivers out of the 11,000 — or 2.8% — qualifying for this level. This is also the pool that Tier 4 drivers are selected from.

Advertisement

19 - 80 hours training
burakpekakcan/E+/Getty Images
How many hours of training does it take to reach Tier 4 certification?
80
20
160
370
Correct Answer
Wrong Answer

Drivers wanting Tier 4 certification must successfully complete 80 hours of training and testing before achieving this status. This training is done over the course of several weeks and pushes the driver to their limits as they push their vehicles to the limit.

Advertisement

You Got:
/35
Motor.TV via YouTube