Can You Get More Than 11 Right on This Difficult Engine Quiz?

By: Zoe Samuel
Estimated Completion Time
4 min
Can You Get More Than 11 Right on This Difficult Engine Quiz?
Image: Obradovic/E+/gettyimages

About This Quiz

There's a reason that the energy industry calls itself "the first five percent of the economy". Without them, there wouldn't be enough power for the rest of human existence to go on in the comfortable, post-industrial manner to which several billion of us have already become accustomed, and the remainder are starting to enjoy in increasingly large percentages. 

Still, all that power isn't much use if you don't have a mechanism by which to turn it into useful things. It'd be rather like having a very fast and impressive supercomputer that could code just about anything but had no input device such as a keyboard, or no screen. While a lot of the energy out there goes into electricity, a huge percentage also goes into engines. They're in cars, trains, airplanes, ships, pumps, factories and dozens of smaller gadgets that you could probably live without but really don't want to try. You use them every day whether you use transport or not, because they're essential to manufacturing and transporting the food you eat, the clothes you wear, the house you live in and just about everything else you touch.

However, just because we all depend on them doesn't mean we all know much about them. Even gearheads who can fix certain elements of their cars may struggle to know too much about how engines really work or what principles they depend upon. That's why this very difficult quiz will challenge even the biggest motorhead out there!

Where would you find a 3-phase traction motor?
Plane
Train
Car
Spaceship
Correct Answer
Wrong Answer

The ACS-64 is a new locomotive that features these traction motors. Its name stands for Amtrak Cities Sprinter, and it helps bring the ageing Amtrak fleet up to date. These motors are particularly smart because they are electric, and also because they use regenerative power to save and re-use 15% of their energy, which increases efficiency.

Advertisement

"X has two openings for intake and exhaust, while Y only has an exhaust. They are otherwise the same." What type of engines are X and Y?
Jet and rocket
Internal combustion and rocket
Ramjet and scramjet
Any non-rocket engine, and rocket
Correct Answer
Wrong Answer

Rockets carry their fuel and oxygen with them, hence they only have an exhaust, instead of an intake. Other engines need air to make their fuel work, so they need an intake for air, as well as an exhaust.

Advertisement

What gets rammed in a ramjet?
Air
Jet
Fuel
Piston
Correct Answer
Wrong Answer

A ramjet works by "ramming" air into the system to create a much higher-pressure combustion than would otherwise be possible, hence far more thrust. The idea came to French inventor Rene Lorin in 1908, though a ramjet was not built for some decades after.

Advertisement

What does a turbo engine add to the cylinder to increase the amount of thrust?
Oil
Air
Steam
Lubricant
Correct Answer
Wrong Answer

Regular internal combustion engines combust a mix of fuel and air. Turbo engines push a little extra air into the cyclinder to move pistons down with more force, which increases the oomph of the engine.

Advertisement

What is torque?
Rotational force
Direct force
Direct force that produces rotation
Another word for horsepower
Correct Answer
Wrong Answer

Torque is when you apply force in a straight line but it produces a rotational effect. For example, when you open a door, you apply force to the handle end of the door but you get rotation at the hinge side. Engines do the same thing to the crankshaft, thus driving the wheels to rotate.

Advertisement

What is special about a Wankel engine?
Nothing
It's rotary.
It was the first enclosed engine.
It was the first liquid fuel engine.
Correct Answer
Wrong Answer

A Wankel engine has a rotary instead of a piston motion. This is much more efficient but presents lots of issues in actually making it work. Wankel engines were invented in the 1950s but generally didn't find a lot of commercial uses until the last 20 years.

Advertisement

What did Hero (or Heron) of Alexandria build in 50 B.C.?
A crankshaft
A piston
A cylinder
The first steam engine
Correct Answer
Wrong Answer

Heron's model was just a toy where you heated up water which drove a sphere to spin and thus cause a little pair of fins to twiddle. However, it used all the principles of the Industrial Revolution. It's likely a copy of the plans burned in the Great Library of Alexandria.

Advertisement

Which of these is the best definition of an engine?
A machine that drives a vehicle or pump
A machine that converts energy into motion
A machine that converts heat into motion
A machine that produces power
Correct Answer
Wrong Answer

Engines are machines that convert energy into motion. For example, a steam engine burns a fuel source like coal to generate heat, which turns water into steam, which drives pistons. These are connected to a pump or axles, where the energy becomes motion.

Advertisement

Who invented the crankshaft?
Christiaan Huygens
Ismail Al-Jazari
James Watt
George Stephenson
Correct Answer
Wrong Answer

Ismail al-Jazari invented the crankshaft in 1206. As we see with Heron of Alexandria, there were a lot of opportunities back in older times for the Industrial Revolution to start earlier, but unfortunately society wasn't connected or rich enough to make it happen. That means even brilliant minds like al-Jazari didn't get to flourish as much as they should have.

Advertisement

Who built the first "atmospheric engine" in 1673?
Thomas Mead
Thomas Newcomon
Christiaan Huygens
George Brayton
Correct Answer
Wrong Answer

Huygens built this engine in the 1600s but could only get it to move one stroke at a time. An engine only provides value if it goes up and down continuously, which other thinkers were able to crack using Huygens' work - meaning he was yet another brilliant mind trapped before his time.

Advertisement

Which of these is true?
All engines are motors but not all motors are engines.
All motors are engines, but only some engines are motors.
Some motors are engines, and some engines are motors.
All motors are engines, and all engines are motors.
Correct Answer
Wrong Answer

Motors and engines both use power to supply movement. Motors specifically have to supply movement to a machine, so not all engines are motors, but some are. Motors run on electricity or combustion, while engines only run on combustion, so not all motors are engines, but not all. Thus electric cars arguably have a motor but no engine.

Advertisement

What fuel was used in The Rocket, George Stephenson's famous early locomotive?
Coal
Coke
Wood
Crude oil
Correct Answer
Wrong Answer

Coke is what happens when you heat coal without any air. This removes impurities and provides a nice energy-dense fuel that has all the upsides of coal but few of the downsides.

Advertisement

What is the "gas" in early "gas-powered" engines?
Gasoline
Natural gas
Steam
Farts
Correct Answer
Wrong Answer

Natural gas is mostly methane, which contains a lot of energy and is a fine source of power (carbon emissions that endanger the planet notwithstanding!). It's the "gas" that is in early gas engines, instead of gasoline or petroleum.

Advertisement

Which of the below is the best definition of "combustion"?
Literally just burning, as applied to fuels
Rapid chemical combination of a substance with oxygen
Blowing up
Making motion
Correct Answer
Wrong Answer

Combustion is like burning except that the latter produces flames - that is, heat and light. Combustion likewise creates energy and is a kind of burning, but a more specific kind involving oxidation - and hopefully, motion instead of flames.

Advertisement

Which of these key engine components was invented by Edward Butler?
Set spray carburetor
Spark plug
Ignition coil
All of the above
Correct Answer
Wrong Answer

Butler's work was key to the production of early cars, which had more components in them than you'd think. Foremost among the users of his ideas was a certain Gottlieb Daimler, who you may have heard of!

Advertisement

How did the patent for the first car describe it?
A vehicle powered by a steam engine
A vehicle powered by a gas engine
A vehicle powered by an engine
A vehicle with an engine providing power
Correct Answer
Wrong Answer

It had a gas engine, and so that's how it was described. Of course, it was in German, but the translation above is pretty solid. Patents are an essential part of the invention process as they enable monetization of ideas, which means investment and research.

Advertisement

When it comes to converting energy into motion, what alternative to the piston was known to be possible in the 1800s, but didn't put out net power until 1903?
Turbine
Propeller
Turbo
Jet
Correct Answer
Wrong Answer

Turbines were the dream goal of a lot of inventors in the 1800s, but they always used more energy than they put out. Norwegian Ægidius Elling build the first turbine that put out a net plus, and now of course, that principle is key to wind technology, which is due to overtake natural gas as the second-cheapest form of energy (solar is cheapest). Technology really does change quickly when the investment is there!

Advertisement

What was the maximum weight the Wright Brothers settled on for the engine in their first successful flight?
1,000 lbs or less
500 lbs or less
200 lbs or less
100 lbs or less
Correct Answer
Wrong Answer

The Wright Brothers didn't build all their own stuff, though they did build a lot of it. They were a rare combination of mechanical genius and daredevil insanity.

Advertisement

What does a vehicle powered by a ramjet need to do before it uses its ramjet?
Start moving
Turn on the ramjet
Stop moving
Turn off any other engine while moving
Correct Answer
Wrong Answer

Ramjets only work when the outside air is going very fast. That means vehicles that use a ramjet need a conventional jet engine to get up to speed before turning on the ramjet.

Advertisement

When did the first electric car drive up a hill?
1832
1932
1994
1981
Correct Answer
Wrong Answer

You couldn't buy a Prius until the 1990s, but the electric car is actually older than cars that drive on liquid fuel! It was invented by Robert Anderson, an oddball who put a little electric motor and a battery on a carriage and drove it up a hill. Electric cars were king until lack of electrical infrastructure, Henry Ford and rising mass production made the fuel-powered cars cheaper.

Advertisement

What does the "scram" in scramjet stand for?
Super cool ramjet
Supersonic combustion ramjet
Superspeed coaxial ramjet
Supersonic coolant ramjet
Correct Answer
Wrong Answer

If you fly a ramjet-powered plane really fast, it gets more and more efficient until Mach 5, when it starts to get less efficient due to having to slow down the air that it takes in before combusting it. Enter scramjet, which doesn't have to do this, and can thus go super-duper fast. Scramjet can fly about 7,000 mph!

Advertisement

What does OPOC stand for?
Old people old cars
Outside-piston on-cyclinder
Opposed-piston opposed-cylinder
Other-piston other-cylinder
Correct Answer
Wrong Answer

OPOC is a modern engine based on an old idea. As the electric car supplants the internal combustion engine, other new layouts and ideas are springing up, and OPOC is one of them.

Advertisement

Where might you find a rotary engine in something you use every day?
Desktop computer
Subway train
Range extender on an electric car
Coffee maker
Correct Answer
Wrong Answer

Since you're a forward-looking person who hates paying for fuel and maintenance, you've probably got an electric car already. OK, maybe not, but you're probably going to have one soon, because internal combustion engines are being banned in a lot of countries and EVs are already cheaper. One of the fun elements in your EV might be the rotary engine in the range extender.

Advertisement

For what primary purpose were the first commercial-scale engines used?
Railways
Pumping water out of mines
Hoisting large weights on construction sites
Opening locks on canals
Correct Answer
Wrong Answer

The Industrial Revolution started with coal as much as anything, and if you want to have a safe(ish) mine to work in, pumping out the water is a must. The ability to partially automate this by using an engine instead of hand or animal power was a huge factor in the coal-fueled revolution taking off.

Advertisement

What kind of engine did NASA put in the probe Dawn, which visited the dwarf planet Ceres?
Ion thruster
Booster engine
Scramjet
Regular rocket
Correct Answer
Wrong Answer

An ion thruster sounds like something out of Star Trek, but it's real! NASA has one in development that could get humanity to Mars in under two months.

Advertisement

What did Taqi al-Din create in 1577, that inspired many later thinkers and helped undergird the Industrial Revolution?
Crankshaft
Gasoline
Piston
A self-rotating spit
Correct Answer
Wrong Answer

Taqi al-Din is one of the giants of the Islamic Golden Age whose name ought to be as familiar as James Watt. He was a Newtonian figure who kept inventing things that nobody else in his time could comprehend. He became rich and famous as a result, but alas, not outside his own time.

Advertisement

Which of these is not a real unit involved in engines?
Watt
Ohm
Wisp
Volt
Correct Answer
Wrong Answer

A wisp is not a unit of energy. Watts, volts and ohms respectively measure power, speed of current and resistance of a wire. Thus you need to be able to calculate all of them to make your engine go. They're all named for pioneers of relevant technology.

Advertisement

When you fractionally distill crude oil to make fuel for engines, which fraction is distilled first, out of the below?
Diesel
Gasoline
Petroleum
Naphtha
Correct Answer
Wrong Answer

There's a handy mnemonic to remember the order of distillation in crude oil: grand-parents never knock down friendly little boys. That is, gasoline, petroleum, naphtha, kerosene, diesel, fuel oil, lubricant oil, and bitumen!

Advertisement

What's the key difference between steam and internal combustion engines?
One burns fuel continuoulsy to generate heat to turn to motion; the other creates lots of tiny explosions by mixing air and fuel then igniting them, which is combustion.
One burns the fuel inside the engine and the other burns it outside.
Steam is much less efficient because it gets jammed more.
One is fueled by coal, the other by gas.
Correct Answer
Wrong Answer

The difference is that steam engines need a continuous source of heat but combustion engines don't. That's why steam takes a while to get going by building a "head of steam" while the other just needs ignition.

Advertisement

What is one horsepower, in watts?
1200
746
1832
66
Correct Answer
Wrong Answer

For some reason, James Watt decided to make horsepower a super annoying amount of energy for people who'd prefer to calculate with round numbers. He was brilliant, sure, but he didn't care how much misery he inflicted on generations of school students.

Advertisement

What does the V in V8 stand for?
V
Vehicle
Vent
Volt
Correct Answer
Wrong Answer

The cylinders in a V8 or V6 etc are lined up in two sets of three or four. These are typically set at an angle from one another, which means they create a V shape. So the V is just describing what's right there!

Advertisement

Which of the below was NOT involved with the invention of the motorcycle?
Gottlieb Daimler
Nikolaus Otto
Wilhelm Maybach
Karl Benz
Correct Answer
Wrong Answer

Daimler and Maybach both worked for Otto, who sued them for stealing his work, even though he later got in trouble for stealing patents himself. Benz was a contemporary and competitor of the other three.

Advertisement

In what plane would you find the Rolls-Royce/Snecma Olympus 593 engine?
Concorde
Boeing 747
McDonnell-Douglas MD-80
Airbus A380
Correct Answer
Wrong Answer

Concorde was a supersonic passenger jet that sadly doesn't fly anymore, as the economics of it were too challenging. However, it was a technological marvel and the ideas used to produce it are currently being used to generate a new generation of lighter, more affordable supersonic commercial airliners that you should expect soon, coming to a sky near you!

Advertisement

How many moving parts are in a Tesla motor?
2
200
2000
117
Correct Answer
Wrong Answer

There are two moving parts in the Tesla motor. Both are involved in making the drive train go. This is one reason that electric vehicles are so quiet and also practically maintenance-free; they have about 1% (that's just one, not a typo!) of the total moving parts of a traditional car.

Advertisement

How does an engine muffler work?
It reflects the sound waves back so they cancel themselves out.
It makes the sound waves go upward so you can't hear them from the ground nearby.
It makes the sound waves go through a tube that makes them smaller.
It stops the engine wobbling so much, which reduces the sound at source.
Correct Answer
Wrong Answer

If you bounce soundwaves into each other so the peaks and troughs line up just so, they cancel out. It's a matter of designing your muffler so the angles are just right.

Advertisement

You Got:
/35
Obradovic/E+/gettyimages